Table of Contents
Advertisement
VEHICLE CONTROLS
Driving Position Memory System
You can store two driver's seat (except for
power lumbar), positions with the driving
position memory system.
When you unlock and open the driver's
door with a remote transmitter, the seat
adjusts to retracted positions of one of the
two preset positions automatically.
The seat will move to the stored position
when you set the power mode to
ACCESSORY.
Storing a Position in Memory
1. Adjust the seat, to your preferred
positions.
2. Press SET.
3. Press and hold memory button 1 or 2
within 5 seconds of pressing the SET
button.
You will hear two beeps when the
memory is set.
4. Press one of the memory buttons to
recall previously stored positions.
Adjusting the Head Restraints
Your vehicle is equipped with head
restraints in all seating positions. Head
restraints are most effective for protection
against whiplash and other rear-impact
crash injuries.
The center of the back of the occupant's
head should rest against the center of the
restraint. The tops of the occupant's ears
should be level with the center height of
the restraint.
For a head restraint system to work properly:
• Do not hang any items on the head restraints or from the restraint legs.
• Do not place any objects between an occupant and the seat-back.
46 |
*1
*1 - If equipped
• Install each restraint in its proper location.
Improperly positioning head restraints reduces their effectiveness and
increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.
Adjusting the Front Head Restraints
n
To raise the head restraint: Pull it
upward.
To lower the head restraint: Push it
down while pressing the release
button.
Adjusting the Rear Head Restraints
n
To raise the head restraint: Pull it
upward.
To lower the head restraint: Push it
down while pressing the release
button.
Removing and Reinstalling the Head Restraints
n
Head restraints can be removed for cleaning or repair.
To remove the
Pull the restraint up as far as it will go. Then push the
head restraint:
release button(s), and pull the restraint up and out.
VEHICLE CONTROLS
| 47
Advertisement
Table of Contents
