Table of Contents
Advertisement
DRIVING POSITION MEMORY SYSTEM (DPMS) (
Store driver's seat positions into memory for each corresponding keyless remote
(1 or 2), which are recalled when you unlock the driver's door with the remote and
enter the vehicle.
How It Works
1. Turn on the vehicle. Make sure
the shift lever is in Park (P). For
manual transmission, make sure
the parking brake is applied.
2. Adjust your preferred seat
settings.
Note: Stored positions can also be recalled by pressing one of the
memory buttons (1 or 2) on the door.
14
)
if equipped
3. Press SET. You will hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
ONE-TOUCH TURN SIGNAL
Use this quick and convenient method to signal a lane change.
How It Works
• Lightly push the turn signal
lever up or down for a three-
blink sequence.
• For a continuous signal, push
the lever up or down until it
locks into place.
AUTO HEADLIGHTS WITH WIPER INTEGRATION
For your convenience, your vehicle's headlights automatically turn on when you activate
the windshield wipers.
How It Works
• Make sure your headlights are in the AUTO
position.
• Turn on your windshield wipers.The headlights
also turn on.
• When you turn off the windshield wipers, the
headlights turn off shortly after.
15
Advertisement
Table of Contents
