Configure Wpa/Wpa2-Psk - D-Link DIR-280 User Manual

Secton 4 - Securty
It s recommended to enable encrypton on your wreless Router before your wreless network adapters. Please establsh
wreless connectvty before enablng encrypton. Your wreless sgnal may degrade when enablng encrypton due to the added
overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on Wireless
Setup on the left sde.
2. Next to Security Mode, select Enable WPA/WPA2 Wireless Security
(enhanced).
3. Next to Cipher Mode, select TKIP, AES, or Both.
4. Next to PSK/EAP, select PSK.
5. N e x t t o N e t w o r k K e y , e n t e r a k e y ( p a s s p h r a s e ) . T h e k e y i s a n a l p h a - n u m e r i c p a s s w o r d
between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly
the same on all other wreless clents.
6. Clck Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity
until you enable WPA/WPA2-PSK on your adapter and enter the same passphrase as you did on the Router.
D-Lnk DIR-280 User Manual

Configure WPA/WPA2-PSK

49