Configure Wpa-Psk And Wpa2-Psk - D-Link DIR-280 User Manual

Secton 4 - Securty

Configure WPA-PSK and WPA2-PSK

It s recommended to enable encrypton on your wreless Router before your wreless network adapters. Please establsh
wreless connectvty before enablng encrypton. Your wreless sgnal may degrade when enablng encrypton due to the added
overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on Wireless
Setup on the left sde.
2. Next to Security Mode, select Enable WPA Only Wireless Security
(enhanced) or Enable WPA2 Only Wireless Security (enhanced).
3. Next to Cipher Mode, select TKIP, AES, or Both.
4. Next to PSK/EAP, select PSK.
5. Next to Network Key, enter a key (passphrase). The key is an
alpha-numerc password between 8 and 63 characters long. The
password can include symbols (!?*&_) and spaces. Make sure
you enter this key exactly the same on all other wireless clients.
6. Clck Save Settings to save your settings. If you are configuring the
Router with a wireless adapter, you will lose connectivity until you
enable WPA-PSK or WPA2-PSK on your adapter and enter the same
passphrase as you dd on the Router.
D-Lnk DIR-280 User Manual
between 8 and 63 characters long. The
48