Integra DTR-50.6 Basic Manual page 14

5
Using the multi-zone function
The function allows you to connect the unit with a TV or audio
equipment placed in a separate room so that you can enjoy
audio and video of the connected equipment even if you are
staying in a different room. It is possible to perform playback
in the main room and a separate room at the same time,
for example by playing the Blu-ray Disc player in the main
room where the unit is placed while playing Internet radio in
a separate room. It is also possible to perform playback only
in a separate room. There are three methods to configure
multi-zone connection as described in "a" to "c" in the right.
Simultaneous playback in all zones is also possible.
Main room
Zone 2
Zone 3
• In a separate room, you can enjoy sound from an external
device connected to the HDMI input jack (¼1) or the
analog audio input jacks (¼2) of the unit, sound from the
"NET" or "USB" source, and the AM/FM broadcasting.
14
¼1 Supported by HDMI IN1 to IN4 and AUX Input HDMI/MHL jacks.
¼2 When you connect a CD player or such other player without HDMI
output jack, connect it to the analog audio input jacks of the unit.
Multi-zone output is not possible if the connection is only with digital
optical cable or digital coaxial cable. In case of analog connection,
analog audio output setting may be necessary on the player.
• As for HDMI input and analog audio input, it is possible
to play the same source or different sources in the main
room and separate room.
• As for the "NET" and "USB", you cannot select different
audio sources for the main room and separate room. For
example, if "NET" has been selected in the main room
and then "USB" is selected as playback source in the
separate room, the input in the main room will change to
"USB" accordingly.
• When listening to AM/FM broadcasting, you cannot
select different stations for the main room and separate
room. Therefore broadcasting of the same station will be
heard in the both rooms.
• If you play the same HDMI connected player for the main
room and a separate room, the sound field processing
for 2 ch PCM signals will be made in a separate room.
Outputting Video/Audio to a Separate Room
a. Connecting a TV in a separate room

You can play video and audio of the HDMI connected player
on the TV in a separate room. With an HDMI cable, connect
between the HDMI OUT ZONE2 jack of the unit and the
HDMI IN jack of the TV in a separate room.
Zone 2
Step 3: Playing Back
Change the setting: Press Receiver and then Home on
the remote controller, select "Setup" - "1.Input/Output
Assign" - "Monitor Out" - "Zone 2 Monitor Out" and set the
setting to "Use".
• You can view the information of the connected device
on the TV of Zone 2 by pressing Display during Zone 2
playback.
• The CEC link function does not work with the TV in a
separate room.
Listening to Music in a Separate Room
b. Connecting a Integrated Amplifier in a

separate room
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room. Connect
the ZONE2 PRE/LINE OUT jacks or ZONE3 PRE/LINE
OUT jacks of the unit and the line-in jacks of the integrated
amplifier in a separate room with an RCA cable. In a
separate room, you can enjoy sound from an external
player connected to the HDMI input jack or the analog
audio input jacks of the unit, sound from the "NET" or
"USB" source, and the AM/FM broadcasting.
Zone 2
• Volume can be adjusted with both the unit and the
integrated amplifier used in a separate room. To adjust
it with the unit, press Receiver and then Home on the
remote controller, select "Setup" - "7.Hardware Setup" -
"Multi Zone" - "Zone 2 Out" or "Zone 3 Out" and set the
setting to "Variable". If you connect a power amplifier, be
sure to make the setting and adjust the volume on the
unit.
Zone 3