Speco D4CX Operation Instruction Manual page 72

Operation Instruction
Once you have set the date and time you want, press the
selected date and time will display. (If no video was recorded during the selected time, a message appears alerting you
that no image was recorded at that time.) The
Bookmark
Selecting (Bookmark) in the Search menu adds the current playback point to the bookmark list. See the following
Bookmarks section for details.
Display
 Full Screen: Selecting
selected camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1P5, 1P7 or 3x3). Clicking
the left mouse button on the screen again returns to the previous display mode.
 2x2, 1P5, 1P7, 3x3: Selecting
in the selected multiview screen mode (2x2, 1P5, 1P7 or 3x3). Selecting each display mode is the same as scrolling
the mouse wheel up and down when in one of the multiview formats (i.e., 2x2, 1P5, 1P7 or 3x3).
 Camera OSD, Status OSD: Selecting
or Status OSD On and Off.
Previous Group, Next Group
Selecting or (Previous Group or Next Group) in the Search menu moves to the previous or next page.
Alarm
Selecting (Alarm) in the Search menu resets the DVR's outputs including the internal buzzer during an alarm. It
is the same as pressing any button on the front panel when the alarm is activated.
Digital Deterrent
Selecting (Digital Deterrent) in the Search menu displays the following setup screen and allows the DVR to play
manually.
Panic
Selecting (Panic) in the Search menu starts panic recording of all cameras, and selecting
Camera Menu
 Zoom: Selecting (Camera Menu) → Zoom and choosing the camera number zooms the current playback image
of the selected camera on the screen. Selecting Zoom again exits the Zoom mode.
 Audio: Selecting (Camera Menu) → Audio toggles audio playback On and Off. Recorded audio will be played
when the DVR displays a camera with recorded audio in full screen mode.
 Show/Hide Text-In: Selecting
data on the screen if the video was recorded with text-in data.
64
Move the cursor over the date and time and press the
You can use the Left and Right arrow buttons to highlight the year, month, day,
hours, minutes and seconds. Use the Up and Down arrow buttons to change
to the date and time you want to search for video.
button and arrow buttons can now be used to review the surrounding video.
(Display) →
(Full Screen) and choosing the camera number button displays the
(Display) →
, ,
(Display) → Camera OSD or Status OSD toggles Camera OSD
Highlight the box beside Source name and press the
file to play. Highlighting Trigger plays the selected file as the digital deterrent.
(Camera Menu) → Show Text-In or Hide Text-In shows or hides the text-in
button. Then highlight Go and press the
, or (2x2, 1P5, 1P7 or 3x3) displays the cameras
(Play/Pause) button.
button. The
button to select the source
again stops panic recording.