Figure 16: Schedule - Settings (Advanced Mode) Setup Screen - Speco D4CX Operation Instruction Manual

When the DVR is in the Event mode, the red
icon at the top-left corner of the screen when any event occurs. When the DVR is in the Pre-Event
and displays the
recoding mode, the yellow
in the Pre-Event mode, the red
When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the
top-left corner of the screen. The DVR follows the Event settings and the
Highlight the box under the Channels heading and press the
Mode Only)
Highlight the box under the Settings heading and press the
Figure 16: Schedule – Settings (Advanced Mode) setup screen.
You can set the ips, Quality and Resolution (ips, Quality, Resolution and Dwell for Advanced Mode setup) of the recording
for any modes you set up in the Mode column. If you do not set the ips, Quality, Resolution and Dwell in the Settings
column, the DVR will follow the default settings. See below for details.
NOTE: Descriptions of the Record icons in the Type column are as follows:
Time-lapse (Time)
Video Loss
Channels that are not defined will use the setting values of the previous schedule item.
When multiple events are detected at the same time from a specific channel, the DVR will record event
video with the high setting values if the ips, Quality, Resolution and Dwell values of events are different
from each other. However, the ips will be reset to the supported maximum value when the ips, Quality,
Resolution and Dwell are all set to the highest value. (Advanced Mode Only)
Highlight the box under the
confirm that you want to delete the settings.
Highlight Default... and press the
Highlighting boxes under ips and pressing the
recording. You can select from 1.00 to 30.00 ips (25.00 ips PAL).
icon displays at the top-left corner of the screen. The DVR will record
icon displays when there is no event, and the DVR is not recording. When the DVR is
and display when any event occurs and the DVR starts recoding.
Alarm-In
Video Blind
heading and press the button to delete the recording settings. You will be asked to
button. The Default screen appears.
button allows you to set the images per second for Time and Event
icon displays.
button to select which cameras will be recorded. (Simple
button to define the recording settings.
Motion
Text-In
Digital Video Recorder
icon displays at the
29