Maintenance - Konica Minolta FK-502 Service Manual

Field Service Ver. 9.0 Jan. 2010

MAINTENANCE

4. REPLACEMENT PROCEDURE
4.1 In the case of bizhub C360/C280/C220
4.1.1 Removal of the FK-502 (bizhub C360/C280/C220)
• In order to replace the FK-502, remove the FK-502 or FK-502 (Extension line) in the fol-
lowing order.
NOTE
• Be sure to check to see if the main power switch is turned off.
• The board may be damaged due to static electricity. Be sure to take an appropriate
measure against static electricity before conducting the operations.
1. Turn off the main power switch and the power switch of the main body, and then unplug
the power cord from the power outlet.
4. REPLACEMENT PROCEDURE
2. Open the door portion of the right
side rear cover of the main body.
3. Remove the telephone line cable
that is connected.
4. Remove the rear right side rear
cover of the main body. (4 screws)
57