Using A Component Video Connection With Digital Audio - Pace IPH8005 Installation Manual

Using a component video connection with digital audio

Component video uses the Y Pb Pr (green, blue, and red) connectors to provide
component video signals to an HDTV or SDTV. You must connect the audio signal
separately using a digital optical audio cable.
To connect the receiver to the TV using a component video cable and digital audio
cable:
1. Insert the connectors on the color-coded component video cable into the Y Pb Pr
(green, blue, and red) connectors on the receiver.
2. Insert the other end of the component video cable into the COMPONENT VIDEO Y
Pb Pr (green, blue, and red) connectors on the TV.
3. Connect the fiber optic audio cable to the OPTICAL connector on the receiver.
4. Connect the other end of the fiber optic audio cable to an available OPTICAL IN
connector on the TV.
Receiver
VIDEO OUT
TO WALL
(VIDEO IN)
NETWORK
Television
ANT (75 )
R L
TO TV
AUDIO
Y Pb Pr
Component video cable
AUDIO OUT
L
COMPOSITE
VIDEO IN
VIDEO
IN
L
AUDIO
R
OUT
+12V
1.5A MAX.
POWER
OPTICAL
COMPONENT COMPONENT
VIDEO IN
VIDEO IN
Y
Y
P
P
B B
P P
R R
L L
AUDIO
AUDIO
R
R
OPTICAL IN
1
2
Digital optical
audio cable
21