Connect The Receiver To The Home Network - Pace IPH8005 Installation Manual

Connect the receiver to the home network

If you connect to your IPTV signal from your HPNAv3 in-home network over coaxial
cable, use the TO WALL (VIDEO IN) connector on the back panel of the receiver to
connect to the HPNAv3 in-home network through a coaxial cable.
Wall outlet
Coaxial cable
If you connect to your home network with an Ethernet (CAT-5) cable, use the
NETWORK connector on the back panel of the receiver to connect to the home
network Ethernet port.
Wall outlet
Ethernet cable
Note: Use only one of these connections to access your home network.
Receiver
VIDEO OUT
TO WALL
(VIDEO IN)
NETWORK
R
Y
Receiver
VIDEO OUT
TO WALL
(VIDEO IN)
NETWORK
Y
L
TO TV
AUDIO
OPTICAL
Pb Pr
R L
TO TV
AUDIO
OPTICAL
Pb Pr
+12V
1.5A MAX.
POWER
+12V
1.5A MAX.
POWER
15