Back Panel - Pace IPH8005 Installation Manual

Back panel

The following illustration shows the ports and connectors on the back of the receiver.
Coaxial
input
VIDEO OUT
TO WALL
(VIDEO IN)
NETWORK
Network Component
port
TO WALL (VIDEO IN)
Connects the HPNAv3 in-home network over coaxial cable, if applicable.
NETWORK
Connects the Ethernet network cable, if applicable.
Y Pb Pr
Connects the receiver to a high-definition TV or home theater receiver using a
component video connection.
VIDEO OUT
Connects the receiver to a standard-definition TV using a composite video connection.
AUDIO
Connects the receiver to a TV or home theater receiver using an analog audio
connection.
TO TV
Connects the set-top box to the RF/Antenna connector on your TV or VCR (optional).
OPTICAL
Connects the receiver to a TV or home theater receiver using a digital audio
connection.
HDMI
Connects the receiver to a high-definition TV or home theater receiver using an HDMI
connection.
POWER
Connects the power adapter to the receiver. The LED lights green when the receiver is
receiving power from the wall outlet.
Composite Analog
video audio
output output
R L
AUDIO
Y Pb Pr
Digital audio
video output
output (optical)
RF
output
TO TV
OPTICAL
HDMI
output
Power
+12V
1.5A MAX.
POWER
13