Specifications; Installation - JUKI DDL-8700 Instruction Manual

1. SPEcIFIcatIoNS

Applcaton
Sewng speed
Sttch length
Needle
Presser foot lft (by knee lfter)
Lubrcatng ol
Nose
Applcaton
Sewng speed
Sttch length
Needle
Presser foot lft (by knee lfter)
Lubrcatng ol
Nose

2. INStaLLatIoN

3
1
1
22.5 mm
2
A
(1) Installing the under cover
) The under cover should rest on the four corners of the machne table groove.
2) Two rubber seats 1 for supportng the head porton on the operator sde A are fixed on the extended
porton of the table by httng the nal 2 , and the other two rubber cushon seats 3 on the hnge sde
B are fixed by using a rubber-based adhesive. Then, oil pan 4 s placed.
3) Ft hnge 1 into the opening in the machine bed, and fit the machine head to table rubber hinge 2 be-
fore placng the machne head on cushons 3 on the four corners.
DDL-8700
General fabrics, light-weight
and medium-weight materials
Max. 5,500 sti/min
Max. 5 mm
DB x 1 #9 to #18 (134 #65 to #110)
10 mm (Standard) 13 mm (Max.)
- Equivalent continuous emission sound pressure level (L
A-weighted value of 83.5 dB; (Includes K
GR2 at 5,000 sti/min.
- Sound power level (L ) ;
WA
A-weighted value of 88.0 dB; (Includes K
GR2 at 5,000 sti/min.
3,000 sti/min
- Equivalent continuous emission sound pressure level (L
A-weighted value of 83.5 dB; (Includes K
GR2 at 5,000 sti/min.
- Sound power level (L ) ;
WA
A-weighted value of 88.0 dB; (Includes K
GR2 at 5,000 sti/min.
3
1
4
18.5 mm
3
B
DDL-8700A
General fabris, light-weight
materals
Max. 4,000 sti/min
Max. 4 mm
DA x 1 #9 to #11 (134 #65 to #75)
9 mm (Max.)
JUKI New Defrix Oil No. 1
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
WA
DDL-8700L
For heavy-weight materials
Max. 4,000 sti/min (for feed pitch of 5 mm or less)
Max. 3,200 sti/min (for feed pitch of 5 mm or more)
Max. 7 mm
DB x 1 #20 to #23 (DP x 5 #16 to #18)
13 mm (Max.)
JUKI New Defrix Oil No. 1
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204
WA
3
3
2
–  –
DDL-8700H
Medium-weight materials,
heavy-weight materials
Max. 4,000 sti/min
Max. 5 mm
DB x 1 #20 to #23 (134 #125 to #160)
10 mm (Standard) 13 mm (Max.)
) at the workstaton :
) at the workstaton :
3
4
1
1
3