Model Wiring Diagram; Transmitter And Receiver - Traxxas Slash VXL 58076-1 Owner's Manual

Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link ™ Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.

TRANSMITTER AND RECEIVER

Set Button Throttle Neutral
Adjust
Red/Green Status LED
see page 28 for more info
Menu Button
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Link
Button
Power Switch Battery Compartment
**Accessory sensor port for use with the Telemetry
Expander Module (see Traxxas.com for more information).
TRAXXAS TQ

MODEL WIRING DIAGRAM

Steering Wheel
Antenna
VXL-3s ELECTRONIC SPEED CONTROL
Traxxas High-Current
Sensor Expansion
Connector (Male)
Port **
to Battery
Cooling Fan
Connector
LED
(for optional use)
Receiver cable
(RX wire)
LED
RADIO & VELINEON POWER SYSTEM
i
Channel 1
Steering Servo
Traxxas High-Current
Connector (Male)
to Battery
Cooling Fan
Connector
(for optional use)
V/T - Voltage/Temp Senor Port**
Channel 2
RPM - RPM Sensor Port**
Electronic Speed Control
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Channel 1*
* Not used ** Accessory sensor port for use with TQi Docking Base
(see Traxxas.com and included materials for more information)
EZ-Set Button
(On/Off Button)
ESC/Motor Wiring Diagram
Brushless Motor
(see sidebar for proper
motor wiring)
Motor Cap
to Motor
Heat Sink
SLASH VXL • 11