Transmitter And Receiver; Model Wiring Diagram; Electronic Speed Control - Traxxas E REVO 56036-1 Owner's Manual

EVX-2 Wiring Diagram
10 • E-REVO
TRAXXAS TQ RADIO SYSTEM
i
Your model is equipped with the newest TQi 2.4 GHz transmitter
with Traxxas Link ™ Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.

TRANSMITTER AND RECEIVER

Set Button Throttle Neutral
Adjust
Red/Green Status LED
see page 31 for more info
Menu Button
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Link
Button
Power Switch Battery Compartment
** Accessory sensor port for use with the Telemetry Expander Module (see Traxxas.com and included materials for more information)

MODEL WIRING DIAGRAM

Antenna
Steering Wheel
Receiver
V/T - Voltage/Temp Sensor Port**
RPM - RPM Sensor Port**
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Steering Servo
* Not used ** Accessory sensor port for use with the Telemetry Expander
Module (see Traxxas.com and included materials for more information)
Sensor Expansion
EVX-2 ELECTRONIC SPEED CONTROL
Port **
LED
High-Current
Battery Connector
Heat Sinks
Channel 1
Steering Servos
Channel 2
EVX-2 Electronic
Speed Control
To Motor
EZ-Set Button
Motors
(Titan ® )
High-Current
Connector