Model Wiring Diagram; Vxl-3M Electronic Speed Control; Transmitter And Receiver - Traxxas 1/16 Slash VXL 4x4 7009 Owner's Manual

VXL-3m Wiring Diagram
MOTOR
10 • 1/16th SLASH VXL
TRAXXAS TQ RADIO & VELINEON POWER SYSTEM
i
Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link ™ Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.

TRANSMITTER AND RECEIVER

Set Button Throttle Neutral
Adjust
Red/Green Status LED
see page 28 for more info
Menu Button
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Link
Button
Power Switch Battery Compartment
** Accessory sensor port for use with TQi Docking Base (see Traxxas.com and included materials for more information)

MODEL WIRING DIAGRAM

Antenna
Steering Wheel
Receiver
V/T - Voltage/Temp Senor Port**
RPM - RPM Sensor Port**
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Channel 1*
* Not used ** Accessory sensor port for use with TQi Docking Base
(see Traxxas.com and included materials for more information)
Sensor Expansion
Port **

VXL-3m ELECTRONIC SPEED CONTROL

To Motor
LED
EZ-Set
Button
Channel 1
Steering Servo
Motor
(Velineon 380)
®
Channel 2
VXL-3m
Electronic
Speed Control
High-Current
Connector
High-Current
Battery Connector
Heat Sinks
LED