Transmitter And Receiver; Model Wiring Diagram - Traxxas XMaxx 77076-4 Owner's Manual

Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link Model Memory. The transmitter has two
™
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.

TRANSMITTER AND RECEIVER

Set Button Throttle Neutral
Adjust
Red/Green Status LED
see page 29 for more info
Menu Button
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Link
Button
Power Switch Battery Compartment
** Accessory sensor expansion port for use with the Telemetry Expander Module
(see Traxxas.com and included materials for more information)
TRAXXAS TQ

MODEL WIRING DIAGRAM

Channel 1
Steering Servo
Antenna
Steering Wheel
V/T - Voltage/Temp Sensor
RPM - RPM Sensor
BATT/
CH5 - Battery/Channel 5
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Steering Servo*
*Not used
Sensor Expansion
Port **
LED
RADIO & VELINEON POWER SYSTEM
i
Temp
Sensor
Velineon
1600XL
Motor
Channel 2
VXL-6s Electronic
Speed Control
LED
Traxxas High-Current
EZ-Set Button
Connector (Male)
(On/Off Button)
Velineon 1600XL Specs
Type:
Motor Heat
Sensorless brushless
Sink
rpm/volt:
1600
Connection type :
6.5mm bullet
Diameter:
48mm (1.88")
Length:
110mm (4.32")
Weight:
665g (23.44oz)
ESC/Motor Wiring Diagram
to Battery
X-MAXX • 11