Operation - Aprilaire 8336 User Manual

Operation

Setting or Changing the Setpoint Temperature
1. Press either the
The display will show the current
temperature setpoint.
2. Press either the
to adjust the temperature setting
either up or down.
The display will return to the room temperature display five seconds after
the last input and the new setpoint will be saved.
Changing Temperature Differential
IMPORTANT: The temperature differential is factory set at 1 (1°). This
means that whenever the room temperature changes by one half of a
degree from the temperature setting, the system will turn on. If the
system turns on too often, increase the temperature differential.
1. Press both
at the same time and hold for one
second.
COOL-OFF-HEAT-EM
2. Press either the
to adjust the temperature
differential up or down.
The display will show:
Differential
Setting
1 1°F/.5°C
2 2°F/1.0°C
3 3°F/1.5°C
The display will return to the room temperature five
seconds after the last input.
or
COOL-OFF-HEAT-EM FAN: AUTO - ON AUX CHECK EMER
or
and
FAN: AUTO - ON AUX CHECK EMER
or
Degrees
button.
button
buttons
button
6
C