Charging The Watch; Maximizing Battery Life; Navigating The Watch - Timex Ironman Run x20 GPS M062 Instruction Manual

ICONS
GPS status
Battery
Alarm

CHARGING THE WATCH

Before you use the watch the first time, fully charge the
battery using your computer or a wall outlet as a power
source.
1. Attach the charging cable clip to the watch so the clip's
pins align with the contacts on the back of the watch.
2. Select a power source:
•
Computer: Insert the free end of the charging cable
into a powered USB port on your computer.
•
Wall outlet: Insert the free end of the charging
cable into a USB power adapter, then insert the
adapter into a wall outlet.
3. Let the battery charge at least three hours. The battery
icon flashes during charging.

MAXIMIZING BATTERY LIFE

Use this procedure to maximize the time range of your watch's rechargeable battery:
1. Use your watch without recharging until the last battery indicator segment disappears and the
empty indicator begins flashing. If the watch display goes blank, you can still proceed with this
process as long as the display has been in that state for no more than one or two days.
2. Fully charge the watch battery for at least three hours, until all four segments in the battery
level indicator are no longer blinking.
3. Repeat this procedure twice more.
NOTE: Repeat this procedure every two months if the watch is not used or recharged regularly.

NAVIGATING THE WATCH


↵
Use the , ,
, and
• Press  or  to highlight a menu item.
↵
•
Press to select the item.

•
Press to return to the previous menu.
5
Solid: GPS is acquired.
Flashing: Searching for GPS.
Solid: Battery charge in 25% increments.
Flashing: Watch is powered on and charging.
Alarm is active and will sound at the programmed time.
buttons to access the watch's features: