Audio Select - Sharp 25R-S100 Operation Manual

4
Press CH UP ( ) or DOWN ( ) to channel through the desired mode.
(Refer to the diagram below.)
5
Press VOL (+) or (–) to adjust the selected setting.
6
Repeat steps 4 and 5 to adjust the other settings. Press MENU to exit.
Audio Select
1
Press MENU to access MAIN MENU screen.
2
Press CH UP ( ) or DOWN ( ) to scroll to AUDIO SELECT.
3
Press VOL (+) or (–) to access AUDIO SELECT mode.
4
Press VOL (+) or (–) to select STEREO, SAP or MONO.
5
Press MENU to exit.
NOTE: Once you select MONO mode, the TV sound remains monaural even if the TV set receives
a stereo broadcast. You must switch the mode back to STEREO if you want to hear stereo sound
again.
10