Installation; Camera Mounting - Panasonic WV-SW458 Installation Manual

Installation

Camera mounting

Installation shall be conducted after turning off each device.
z
Attach the camera attachment (accessory) on the ceiling or wall.
<Using a two-gang junction box>
Secure the camera attachment (accessory) to the two-gang junction box (locally procured). (☞ Pages 18 and 19)
<Installing the camera directly on the ceiling or wall>
Attach the camera attachment (accessory) using the installation template label (accessory). (☞ Page 19)
x
Connect each cable. (
c
Using the camera attachment position marker as a guide, match the "OPEN" position of the
camera to the projection of the camera attachment (accessory).
v
Engage the camera attachment fixing screws on the rear of the camera in the camera mounting
holes of the camera attachment (accessory), and then rotate the camera in the direction of the arrow
to secure the camera attachment and camera while storing the cables in the rear of the camera.
Rotate the camera until a click is heard so that the projection of the camera attachment (acces-
sory) will be set to the "LOCK" position.
b
Secure the camera with the camera fixing screw on the front view.
(Recommended tightening torque: 1.37 N·m {1.01 lbf·ft})
IMPORTANT:
• Ensure that the camera fixing screw is firmly secured.
Failure to observe this may cause a malfunction or the product to fall, resulting in injury or
accidents.
Camera attachment position marker
Projection
30
☞
Page 25) Waterproof the connecting portion. (
Camera mounting hole
SW458M
☞
Page 28)
Camera attachment fixing screw
<Front view>