Panasonic WV-SW458 Installation Manual page 33

b
Accommodate the connected cables inside the
cable guide of the camera mount bracket.
IMPORTANT:
• To prevent the cables from being caught
when the base cover (accessory) is
attached, keep the cables inside the cable
guide.
n
Attach the base cover (accessory) that was
removed according the steps in page 20.
m
Use the bit for tamperproof screw (accessory)
to tighten the fixing screws provided on both
sides of the base cover (accessory).
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
,
Remove the cover film from the dome cover.
Cable guide Connected cable
Base cover
(accessory)
Base cover fixing screws
Cable guide
33