Table of Contents
Advertisement
Installing
Hardware
• To turn on your
modem, connect the
power adapter to
the wall outlet and
where necessary,
turn on the mains.
The PWR LED on
your modem lights
up.
• To turn off your
modem, disconnect
the power adapter
from the wall, or
turn off the mains.
4.
Click the Finish button.
5.
When prompted to restart your computer, click the No button.
6.
Shut down your computer.
For instructions on connecting your modem to your computer, see "Installing
Hardware" on page 4-2.
1.
Turn off your computer, and if applicable, disconnect its power adapter from
the power outlet.
2.
Set up your modem as shown below, connect its power adapter to a wall outlet
and turn on your computer.
Phone jack
Connect a phone set
to the Phone jack.
Serial
port
Power
adapter
Interface switch
Push this towards
the RS-232 symbol.
Telephone Line jack
Connect this to a
telephone line for data
and facsimile
transmissions.
Serial
port
Figure 4-2
Setting Up a Serial Connection 4-2
Serial cable
The supplied serial
cable features two
different connector
heads. Choose the
connector head that
is appropriate for the
serial port on your
computer.
Computer
Advertisement
Table of Contents
