Table of Contents
Advertisement
Setting Up a Serial Connection
Installing
Software
For Bluetooth
connection, refer to the
previous chapter.
If you have accidentally
connected your modem
to your computer
before installing the
software, see
"Frequently Asked
Questions" on page B-1
for troubleshooting
advice.
DO NOT connect your modem to your computer until you have installed the
software.
1.
Insert the Installation CD into your CD-ROM/DVD-ROM drive.
The disc supports Windows Autoplay mode and starts running automatically. If
not, you need to enable the Windows auto-insert notification feature for your
CD-ROM/DVD-ROM drive. For more information, see "What do I do when the
installation does not start automatically after the Installation CD is inserted?"
on page B-1.
2.
Follow the instructions on the screen to complete the installation.
Note: Make sure that Modem Drivers is selected during installation.
You may be asked, after an application is installed, if you want to restart your
computer. Click the No button.
3.
For Windows 2000 only: If the Digital Signature Not Found window
appears, click the Yes button.
Figure 4-1
Setting Up a Serial Connection 4-1
Advertisement
Table of Contents
