Zigbee Diagnostics - AMX MIO-R4 Instruction Manual

ZigBee Diagnostics

The ZigBee Diagnostics page (FIG. 20) is a report of the wireless networks found and the status of their availability to
the device. This allows assessment of a network connection to the device while moving through a particular area, for
instance. The ZigBee Diagnostics page is accessed by pressing the ZigBee Diagnostics button on the second System
Settings page (page 22)
FIG. 20 ZigBee Diagnostics page
RF Link Info
Parent ID:
Pan ID:
Channel:
TX Link Quality The connection quality for transmission.
RX Link Quality The connection quality for reception.
Latency:
Progress:
To return to the previous page when finished, press the Back button on the remote.
Mio Modero R-4 Remote
The ID number of the ZigBee gateway currently being contacted by the device. Any number other than
"0" (zero) indicates that the network signal is going through a repeater.
The PAN ID number of the device.
The ZigBee channel currently being used by the device.
The delay detected in the network connection.
This scroll bar shows the progress of finding a ZigBee PAN within range of the device. Continuous
scrolling means that the device is connected.
Protected Settings Menu
25