Installation Guide; L100/L200 - Dometic L 100 Service Instruction

8.0

INSTALLATION GUIDE

8.1

L100/L200

6
Fig. 1
Fig. 2
Installation steps
1. Cut out a rectangle (width 451mm, height 156mm) in the external wall and
install the frame (1) with screws.
2. Push the exhaust pipe with cover (2) through the opening in the frame and
connect it to the exhaust system of the refrigerator.
3. Position the ventilation grid (4) into the frame (1) and fasten it with the
locking screw (6).
4. Place the cover cap (3) on the exhaust pipe (2).
5. Click in the inset for the exhaust conduction (5).
Please note, that the lower ventilation grid does not have the parts for the
exhaust conduction.
The upper ventilation grid should be positioned as high as possible above
condenser (A).
The lower ventilation grid should be flush with the floor of the vehicle.
5 4 3
Fig. 3
13
2 1