Samsung DS 616 User Manual page 28

Digital communications system
Hide thumbs Also See for DS 616:
Table of Contents

Advertisement

INCOMING CALL DISTRIBUTION
Incoming calls can be assigned to ring a distributed station hunt group. This al-
lows all members of the group to share the call load.
INCOMING/OUTGOING SERVICE
Outside lines are available for incoming or outgoing service. Programming allows
any outside line to be used for incoming calls only, outgoing calls only or both way
service.
INDIVIDUAL LINE CONTROL
Each station in the system can be individually programmed to allow or deny dial-
ing out as well as allow or deny answering for each outside line.
INTERNAL PAGE (FOUR ZONES)
Any keyset may be assigned to one of four internal page zones. Any station may
page the keyset speakers in any zone using the corresponding access code. By
dialing internal paging access code, then ✱, all internal zones are accessed.
LEAST COST ROUTING
Least Cost Routing (LCR) is the ability to automatically select the most cost effec-
tive central office route for the outside number dialed by any station. The DS 616
LCR program includes the following features:
Option to use or not use LCR on a tenant basis
!
Programmable LCR access code
!
Digit analysis table 1000 entries each with ten digits
!
Routing by time of day and day of week (4 time bands per day)
!
Routing according to individual station class
!
Modify digits table 100 entries
!
Flexible trunk group advance timer
!
Option to use or not use trunk group advance warning tones
!
LIVE SYSTEM PROGRAMMING
The system can be programmed from any display keyset or personal computer
without interrupting normal system operation. There are three levels of program-
ming: technician, customer and station. The technician level has access to all pro-
grams and can allow the customer access to system programs as needed. Techni-
cian and customer access are controlled by different security passcodes. Program-
ming from a PC requires the PCMMC program.
LOUD BELL CONTROL
Connecting any audible device (that operates on a normal tip and ring circuit) to a
single line station port will provide external loud ringing of incoming calls. For
added flexibility, this station port may be programmed for both day and night ring-
ing.
4.12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents