Trouble Conditions - DSC neo HS2016 User Manual

7

Trouble Conditions

Trouble Conditions (Level 1) are comprised of various of trouble types (Level 2) which may in turn be
related to a specific zone, module, device or additional type of system equipment (Level 3). For an
explanation of possible trouble conditions and the recommended actions required see Table 1-2.
When the system detects a trouble condition the following occurs:
• The Trouble indicator
• The keypad beeps once every 10 seconds.
*
• Press the
Examining troubles is done by pressing
flashes to identify the level of trouble being viewed. One flash = level 1, two flashes = level 2 etc.
Table 1-2 Trouble Conditions
Trouble Trouble #
Condition
Level 1
Trouble #s are used to identify the number to view the trouble and depending on the keypad type
NOTE:
being used, identifies which LED or digit illuminates to display the trouble. Similarly, Trouble
Notification identifies the range that may be displayed on the keypad. When exploring the trouble
levels, the Trouble indicator
Service Required
01
Battery Trouble 02
Bus Voltage
03
AC Troubles
04
Device Faults
05
turns on.
key to silence the keypad beeps.
*
Description
will flash to identify which level you are currently viewing.
Assorted Trouble types.
Time and Date troubles can be resolved by
resetting the Time/Date. To set Time/Date
*
6
press
For all other troubles call for service.
The system has detected a battery trouble
condition. Call for service.
The system has detected a trouble condition.
Call for service.
The system is experiencing loss of power.
Call for service.
If the building and/or neighborhood has lost
electrical power, the system will continue to
operate on battery for several hours.
The system has detected an issue with one or
more connected devices. Call for service.
. When viewing troubles, the trouble indicator
2
Trouble Types
Bell Circuit
RF Jam
Auxiliary Supply
0 1
.
Time and Date
Output 1 Fault
Low Battery
(System Label)
No Battery service.
(System Label)
High Current
Output Low Battery
High Current
Output No Battery
Power Supply Low
Battery
Power Supply
No Battery
HSM2HOST
Keypad
Zone Expander
Power Supply
High Current
Output
Output Expander
Zone
Siren
Repeater
Power Supply
High Current
Output
System Label
Gas
Heat
CO
Freeze
Probe Disconnected
Fire
Zone
Keypad
Siren
Repeater
13
Trouble # Trouble
Notification
Level 2 Level 3
01
02
03
04
05
01 n/a
02 n/a
04 Module 1-4
05 Module 1-4
07 Module 1-4
08 Module 1-4
01 n/a
02 Keypad 1-16
04 Zone expander 1-15
05 Power supply 1-4
06 Output terminal 1-4
08 Output module 1-16
01 Zone label or 001-128
03 Siren 1-16
04 Repeater 1-8
05 Power supply 1-4
06 Output terminal 1-4
07 n/a
01 Zone label or 001-128
02 Keypad 1-16
03 Siren 1-16
04 Repeater 1-8