Cross Zoning; Swinger Shutdown; Call Waiting; Fire Alarm Verification - DSC neo HS2016 User Manual

To Delete a User Access Code
*
2. Press and the code is deleted, and you are returned to the previous
screen. The flag is changed to - from P. On an ICN or LED keypad the pro-
grammed user will have their digits cease being displayed.
Any proximity tags associated with deleted user codes will need to be re-enrolled.
NOTE:

6.2 Cross zoning

The Control Panel includes the cross zone option that requires a trip on two zones within a given time
period, to start an Alarm Transmission Sequence.
Must be enabled and configured by installer.
NOTE:

6.3 Swinger Shutdown

The control Panel has a swinger shutdown feature that, when enabled for CP-01 installation, a
programmable number of trips shall shut down the zone.
Must be enabled and configured by installer.
NOTE:

6.4 Call waiting

The control panel includes a programmable option for call waiting to prevent a call waiting line from
interfering with the alarm verification process. This option is disabled by default.
Must be enabled and configured by installer.
NOTE:

6.5 Fire Alarm Verification

Fire Alarm Verification is an available option for Fire zones. If configured, once the conditions for alarm
verification are met the fire alarm will sound and an alarm transmission will be sent to the monitoring
station.
Must be enabled and configured by installer.
NOTE:

6.6 System Lockout due to Invalid Attempts

If too many invalid access codes are entered, your system can be configured to automatically lock out
inputs from all keypads, wireless and proximity keys, and SMS commands for a specified duration. When
any keys are pressed, an error tone will sound. FMP keys are still active during Keypad Lockout.
Feature and lockout duration must be configured by installer.
NOTE:

6.7 User Labels (LCD keypads only)

Adding or editing labels is accomplished by using a preprogrammed word library. Table 1-1 lists the full
library and the associated three digit code.
To Edit a User Label
1. From the desired user press
*
.
* *
2. Press
or
3
to enter word library.
scroll to User Labels and press
11
LCD Display
Enter New Code
030516
then
(*) to Edit <>
User Code 03 -
LCD Display
Press (*) for <>
User Labels
Program Name
{User 1 Label}