Specifications - Ryobi RLT254FCDSN Operator's Manual

Use unleaded petrol intended for motor
vehicle use with an octane rating of 91 [(R
+ M)/2] or higher. This product is powered
by a 2-stroke engine and requires pre-
mixing petrol and 2-stroke lubricant.
C-Tick compliance mark. Product meets
applicable regulatory requirements.
Guaranteed sound pressure and sound
power lever.
Full choke position
Run choke position
Set switch to "ON"
Push primer bulb
Squeeze throttle and pull starter grip
Pull: Quick release tab
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
Symbol Meaning
DANGER:
Indicates an imminently hazardous situation,
which, if not avoided, will result in death or
serious injury.
WARNING:
Indicates a potentially hazardous situation,
which, if not avoided, could result in death
or serious injury.
CAUTION:
Indicates a potentially hazardous situation,
which, if not avoided, may result in minor or
moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a
situation that may result in property damage.

SPECIFICATIONS

Weight without fuel
trimmer head
Weight without fuel
trimmer head
Fuel tank volume
English (Original Instructions)
and
5.00 Kg
with
5.40 Kg
620 cm
3
Cutting swath
Diameter of cutting line
Engine displacement
Maximum engine performance
(in accordance with ISO 8893)
Maximum rotational frequency
of the spindle
Engine speed
frequency) at recommended
max. spindle
frequency
Engine speed
frequency) at idle
Fuel consumption
accordance with ISO 8893) at
max. engine performance
Specific fuel consumption (in
accordance with ISO 8893) at
max. engine performance
Vibration (in accordance with ISO 22867)
Right handle
- Idle
- Racing
- Equivalent vibration total
value
Left handle
- Idle
- Racing
- Equivalent vibration total
value
Uncertainty
Noise emission (in accordance with ISO 22868)
A-weight emission sound pressure level at the
operator's position
- Idle
- Racing
- Equivalent
A-weight emission sound power level
- Idle
- Racing
3
432 mm
2.4 mm and 2.7 mm
25.4 cc
0.9 kW
12000 min
(rotational
12000 min
rotational
(rotational
2600-3200 min
(in
0.54 kg/h
0.50 kg/h
14.9 m/s
3.7 m/s
9.3 m/s
6.4 m/s
5.8 m/s
6.1 m/s
1.5 m/s
76.8 dB(A)
101.8 dB(A)
98.8 dB(A)
84.8 dB(A)
107.5 dB(A)
-1
-1
-1
2
2
2
2
2
2
2