Table of Contents
Advertisement
PRODUCT SPECIFICATIONS
Cordless line trimmer
Model
Weight
Voltage
No-load speed
Cutting line diameter
Cutting capacity
Vibration total values determined according to EN 50636-
2-91 Annex BB
Vibration emission value
Front handle
Rear handle
Uncertainty
Noise emission values determined according to EN
50636-2-91 Annex CC
A-weighted sound pressure
level at operator's position
Uncertainty
A-weighted sound power level
Uncertainty
BATTERY AND CHARGER
Model
RY18LTX33A-125
Battery pack
RB18L25
Weight
0.46 kg
Charger
RC18120
Compatible
battery packs
Compatible
charger
REPLACEMENT PART
Complete spool
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
RY18LTX33A-0 /
RY18LTX33A-125
2.5 kg
18 V d.c.
6,000 – 6,800/min
1.65 mm
28 – 33 cm
a
= 0.2/ 0.2 m/s²
h
a
= 0.1/ 0.2 m/s²
h
K = 1.5 m/s²
= 77.3 dB(A)
L
pA
K = 3.0 dB
= 92.5 dB(A)
L
WA
K = 3.7 dB
+ K = 97 dB(A)
L
WA
RY18LTX33A-0
-
-
-
RB18..
BCL14.., RC18..,
RAC124, RAC125
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned off or when
it is running idle. These conditions may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
Advertisement
Table of Contents
