Event
You can set details of the event.
• Available events (camera) : It shows the list of all the events supported by a camera by using the ONVIF
protocol.
• NVR supported events : You can map the list of events supported by a camera to events that the NVR can
detect. There is no default value. It only shows the value sent by a camera.
Camera Setting
You can change the video settings of a registered network camera for each channel.
[MENU]
[ENTER]
▼
<Camera Setup>
[ENTER]
• Add : You can add camera profile. Click on the Add button to launch the addition window.
Enter the information and click on the <OK> button to add it to the list.
• Delete : You can delete the selected profile from the list.
• Select Camera : Select the camera channel to change the video transmission settings.
• Profile : Show a video profile for the connected camera.
• Codec : Show the codec information for the selected profile.
• Resolution : You can change the resolution of the selected profile.
• Frame Rate : You can change the baud rate of the selected profile.
• Quality : You can change the video quality of the selected profile.
• Bitrate Control : You can change the bit rate for video transmission of the selected profile.
<Menu>
[ENTER]
▼
▲▼◄►
[ENTER]
<Device>
►
<Camera>
[ENTER]
▼►
English _59