Wizard; Figure 15 Setup Wizard Screen - ADT 4-Channel User Manual

User's Manual
y Alarm-Out Control – The user can reset the DVR's outputs including the internal buzzer during an alarm
by pressing any button on the front panel or remote control on a local system or alarm-out control button
on a PC running RAS.
y Search – The user can access the Search mode on a local system or a PC running RAS.
y Clip-Copy – The user can copy video clips on a local system or a PC running RAS.
y Setup – The user without Setup authority cannot establish any system settings excluding system shutdown
and logout on a local system or a PC running RAS.
y System Time Change – The user can change the system date and time on a local system or a PC running
RAS.
y Data Clear – The user can clear all video data or format disks on a local system or a PC running RAS.
y PTZ Setup – The user can establish all PTZ settings on a local system or a PC running RAS.
y Alarm-Out Setup – The user can establish all Alarm-Out settings on a local system or a PC running RAS.
y Record Setup – The user can establish all Record settings on a local system or a PC running RAS.
NOTE: In addition to using the front panel buttons or the infrared remote control, you can
use the virtual keyboard to assign the password. To display the virtual keyboard click the
button using the mouse.
Highlighting the box beside Auto Login allows you to select a User to be automatically logged
in when the DVR is powered up. It can also be set to never automatically login a user.
Highlighting the box beside Auto Logout allows you to select from a list of times that the user
will be automatically logged out. The options are: Never, 1 min., 3 min., 5 min., 10 min., 15 min.,
20 min., 30 min. and 1 hr.

Wizard

Highlight Wizard and press the
guides you through configuring the system for basic operation.
NOTE: This Wizard screen can only be accessed when logged on as the admin user.
Figure 15 Setup Wizard screen.
20
To add a User, highlight the + User... box and press the
A virtual keyboard appears allowing you to enter the User Name.
Enter the name and assign the User to a Group and password. You
can use camera buttons on the front panel to assign the password.
The password can be up to 8 digits. You will be asked to confirm
the password.
button. The Wizard setup screen appears. The Wizard setup
Select either Quick wizard or Network wizard
and select the Next button to start the selected
setup wizard.
NOTE: Selecting the Cancel button
throughout the screens exits the Quick
Setup Wizard without saving your changes
and returns to the main setup screen.
button.