Reserve Trunk; Assigning A Station Number; (Not For U.s.) - Siemens HiPath 3000 Operating Instructions Manual

Making Calls
Step by Step
18

Reserve Trunk

If this feature is configured (contact System Support),
you can reserve a busy trunk for your own use.
When the trunk is free, you receive a call.
Lift the handset.
Enter the external cod e. The external trunk is busy; you
hear a busy signal tone. ap prox. about 5 seconds until
the busy tone ends.
The trunk is reserved.
Replace the handset (on-hook).
When the reserved trunk becomes free:
Your telephone rings.
Lift the handset. You hear the CO dial tone.
Enter the number of the external station.

Assigning a Station Number

(Not for U.S.)

If this function has been configured (contact System
Support), you can selectively assign a specific number
(DID number) to your telephone b efore making an exter-
nal call. The assigned numb er then appears on the
called par ty's display.
Lift the handset.
Enter the code.
Enter the DID number you wish to use.
Dial the external numb er.