Locking Another Telephone To Prevent Unauthorized Use; Using System Functions From The Outside (Disa: Direct Inward System Access) - Siemens HiPath 3000 Operating Instructions Manual

Using Other Functions
Step by Step
42
Locking Another Telephone to Prevent
Unauthorized Use
If this function has been configured (contact System
Support), you can lock other telephones to prevent
unauthorized use, and later unlock them again.
You can use this function to unlock the telephone for us-
ers who have locked their telephones and then forgot-
ten their PINs.
Lift the handset.
Enter the code.
Enter the internal number of the telephone that you
want to lock or unlock.
Enter the code for "Changeover on".
or
Enter the code for "Changeover off".
Using System Functions from the
Outside
(DISA: Direct Inward System Access)
If this function has been configured (contact System
Support), you can set up external outgoing calls from
outside the system, just like an internal user. You can
also activate and deactivate the following functions in
your system:
• Reset services and functions,
code: #0 Æ page 39
• Call forwarding, cod e:
• Lock and unlock all phones,
66/#66 Æ page 29
code:
*
• Save PIN,
93 Æ page 30
code:
*
• Send a message,
68/#68 Æ page 36
code:
*
• Group ringing , code:
• Group call, code:
• Suppress caller ID,
86/#86 Æ page 16
code:
*
• Open door, code:
• Door opener on/off, code:
• Control relay, code
1/#1 Æ p age 33
*
81/#81 Æ page 50
*
85/#85 Æ page 49
*
61 Æ page 14
*
89/#89 Æ page 15
*
90/#90 Æ page 45
*