Wall Or Ceiling Mounting Bracket - Cisco AIR-LAP1310G Mounting Instructions

Wall or Ceiling Mounting Bracket

The access point supports a wall or ceiling mounting bracket that can be used only with the external
antenna access point unit (see
Installing the access point on a wall or ceiling includes the following subtasks:
1.
2.
3.
Figure 2
Mounting the Access Point
To mount the external antenna access point unit using the wall or ceiling mounting bracket, follow these
steps:
Step 1 Choose a mounting location for the access point. For more information, see
Location" section on page
Find a solid mounting position for the mounting bracket, such as a stud or main building member on a
Step 2
building wall or ceiling. It may be necessary to utilize a stud finder to find a wooden structural member.
Place the mounting bracket on the access point as shown in
Step 3
has an opening that corresponds to the shape of the access point with a flat cut-out segment that
corresponds to the access point connector area.
Note
78-17634-01
Mounting the unit
Routing the cables (normal)
Activating the link
Access Point with Wall or Ceiling Mounting Bracket
7.
The bracket support feet must be positioned towards the front of the access point.
Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions
Figure 2). The bracket can be used indoors only.
Mounting the Access Point
"Choosing a Mounting
Figure 2 and snap into position. The bracket
13