Samsung Galaxy Note II User Manual page 283

To activate your connection:
1. From the main Settings page, touch and slide the Wi-Fi
slider to the right to turn it on. The slider color indicates
the activation status.
2. Tap Wi-Fi Direct.
3. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi-connect
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
4. Tap Done. The direct connection is then established.
Confirm appears in the Status bar.
Scan and select all the device
5. When prompted to complete the connection, the
recipient should tap OK. Your status field now reads
"Connected" and your connected device is listed within
the Wi-Fi Direct devices listing.
To give your Wi-Fi Direct connection a unique name:
It can be difficult to pair to external devices if all you have is
a generic name (ex: Android 12345). It is recommended you
provide your connection with a unique name.
1. From the main Settings page, tap Wi-Fi
2. Press and then tap Rename device.
3. Edit the current name and tap OK to save the new
identification.
Wi-Fi Direct.
Changing Your Settings 277