Samsung Galaxy Note II User Manual page 224

To configure additional alarm settings:
1. Tap More to access additional alarm settings.
2. Slide the slider bar left or right in the Alarm volume field
to decrease or increase the alarm volume. A sample of
the volume level plays.
3. Tap the Alarm tone field and either select an available
tone or select Add to use locate a sound to use as an
alarm ringtone. Tap OK to activate the ringtone.
4. Move the Location alarm slider to the On position to
then use a map location to activate the alarm event.
Activating this feature causes the alarm to only be
activated if you are at the specified location.
• Tap a location on the map or enter a location into the available
field.
• Tap Done to store the new location.
5. Move the Snooze slider to the right to activate the
feature. Tap the field to assign a Interval time
(3 minutes, 5 minutes, 10 minutes, 15 minutes, or
30 minutes) and Repeat (1 time, 2 times, 3 times,
5 times, and 10 times).
218
• Interval indicates the length of time the alarm will remain silent
between alarm notifications (snooze time).
• Repeat indicates the numbers of snooze sessions that are
assigned to this alarm. How many times will the snooze silence
the alarm.
6. Move the Smart alarm slider to the right to activate this
feature which slowly increases screen brightness and
the volume of nature tones to simulate dawn breaking.
Tap the field to assign a interval time (3 min, 5 min,
10 min, 15 min, or 30 min) and nature tone (Fairy
fountain, Birdsong by the lake, Sparkling mist, The
secret forest, Serenity, or Gentle spring rain).
• Interval category describes the length of time the alarm will
remain silent between alarm notifications (snooze time).
• Tone category provides one of several nature sounds that are
used as the alarm tone.
7. Tap the Name field and enter a name for this Alarm.
8. Tap Save to store the new alarm event.