Advertisement
1. Precautions
Test the product for leakage before installing it into the system. Once no leakage is confirmed, proceed with
1)
installation and usage.
Check the components list and condition of the product before installation. If any problem is found, contact the
2)
retailer to obtain a replacement.
Use coolant, approved for personal computer water cooling usage, mixed with distilled water to prevent corrosion.
3)
Do not install the product if it interferes with any (motherboard) components.
4)
To prevent leakage, this product is designed to prevent disassembly. Do not disassemble the product under any
5)
circumstance.
6)
Zalman is not responsible for any damages caused by overclocking.
Excessive force exerted on the product may cause critical damage to the product and/or system.
7)
The cooler must be removed when transporting the system. Zalman is not responsible for any damages that occur
8)
during transport of a system.
9)
Product designs and specifications may be revised without prior notification to improve quality and performance.
Do not ingest Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with
10)
water. If ingested or irritation persists, seek medical attention.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes,
including but not limited to, improper use, problems with electrical power, accident,
neglect, alteration, repair, improper installation, or improper testing.
2. Specifications
Weight
Materials
Dimensions
Compatible CPU Socker
Compatible Tubes
(Outer x Inner)
3. Components
1) Common Components
① One(1) Cooler
154g
Copper (base), Aluminum(case)
53(W) x 63(L) x 40(H)
Intel
Socket 1366 / 775
AMD
Socket AM3 / AM2+ / AM2 / 754 / 939 / 940
Tube Clamp A
14x10mm, 13x10mm
Tube Clamp B
13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm
② Two(2) Tube Clamps A
(13.8x9.5mm)
③ Two(2) Tube Clamps B
(11.5x8mm)
1
Advertisement
