Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba 26AV52R Owner's Manual

Chapter 6: Using the TV~ features
Adjusting the picture
Adjusting the picture quality
Selecting the picture mode
You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.
You can select your desired picture settings from four different
modes, as described below.
Mode
Sports
Standard
Movie
PC
Picture Quality
Bright and dynamic picture (factory setting)
Standard picture settings (factory setting)
Lower contrast for darkened room (factory
setting)
Designed for viewing of PC tables and
documents
Selection
Pressing ""
Pressing ~
Contrast
lower higher
Backlight* darker
lighter
DynaLight** On/Off On/Off
Brightness darker
lighter
Color paler
deeper
Tint
reddish greenish
Sharpness
softer sharper
Note: PC mode is available for HOMI and PC inputs only
(grayed out for other input sources)
3
Press'" or ... to select the picture mode you prefer and
pressS.
To adjust the picture quality:
" Backlight
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0
(Settings are stored in memory.)
**
DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
1
Press
MOU
and open the
Video
menu,
2
Highlight
Picture Settings
and press S.
3
Press ... or ... to select the picture quality you want to
adjust
(Contrast, Backlight, DynaLight, Brightness, Color,
Tint,
or
Sharpness),
and then press"" or
~
to adjust the
setting, as described in the table above.
4
To save the new settings, highlight
Done
and press S.
You can use any of the picture modes (I&' "Selecting the
picture mode," above left) as a starting point for adjusting
the picture settings.
To revert back to the base mode that you began adjusting
the picture settings from, highlight
Reset
and press S.
Your personal preferences Preference
Picture Settings
Noise Reduction
Game Mode Off
Thealer Sellings
To select the picture mode using the menu system:
1
Press
MOU
and open the
Video
menu.
2
Highlight
Mode
and press S.
Standard
Movie
PC
Preference
The picture qualities you adjusted are automatically saved in
the
Preference
mode (I&' "Selecting the picture mode," above
left) until
Reset
is selected.
Note: The picture mode you select affects the current
input only You can select a different picture mode for
each input.