Blocking Channels; Unlocking Programs Temporarily; Using The Input Lock Feature - Toshiba 26AV52R Owner's Manual

Chapter 6: Using the TV's features
Blocking channels
With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you unlock them.
To block channels:
1
Press
M~U
and highlight the Locks menu icon.
2
Press T to display the PIN code entering screen.
3
Enter your four-digit PIN code and press @
(l@" page 44).
4
Press T to highlight Channels Block and then press @
. A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available.
Locks
Enable Rating Blocking Off
Edit Rating Limits
,;Ch8:rj'~~ls_;_~tb~f('t,}~~~::~}-:F·:-JF~-.1:';~
Input Lock Off
Control Panel Lock Off
GameTimer Off
New PIN Code
5
Press ... T to highlight the channel you want to block
and press @, which puts an "X" in the box next to that
channel.
Unlocking programs temporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
This program exceeds the rating limit you set.
Push 'MUTE' to enter PIN
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1
Press
Mter
2
Enter your four-digit PIN code and press @. If the correct
code is entered, the program lock mode is released and
the normal picture appears. All locking is disabled until
the TV is turned off, and will be enabled when the TV is
turned on again.
Using the input lock feature
You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream HD-2,
HDMI1, HDMI 2 and PC) and channels 3 and 4. You will not be
able to view the input sources or channels until you unlock the
inputs.
Channels Block
"0
o
o
o
o
o
o
o
8
o
9
.0
10
Allow All
Block All
Cancel
To lock/unlock the video inputs:
1
From the Locks menu, Press T to display the PIN code
entering screen.
2
Enter your four-digit PIN code and press @.
3
Press T to highlight Input Lock and press
~.
4
Press'" or T to select the level of video input locking
you prefer, as described below.
6
Repeat step 5 for other channels you want to block.
7
Highlight Done and press @.
To unblock individual channels:
In step 5 above, press'" T to highlight the channel you want
to unblock, press @ to remove the "X" from the box, highlight
Done and press @.
To block all channels at once:
Highlight Block All in step 5 on previous page and then
highlight Done and press @.
To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and then
highlight Done and press @.
Mode
Video
Video+
Off
5
Press@.
Description
Locks VIDEO I, VIDEO 2,
ColorStream HO I/H02, HOM I I,
HOMI 2, and Pc.
Locks VIDEO I, VIDEO 2,
ColorStream HOI/H02, HOMI I,
HDMI 2, PC and channels 3 and 4.
• Select Video+ if you play video
tapes via an ANT/CABLE input.
Unlocks all video inputs and channels
3 and 4.