Adjusting The Picture Position - Toshiba 42XL700E Owner's Manual

PC Wide
Use this setting for PC connected via HDMI
or RGB/PC terminal when receiving PC signal
format� This setting will display the image without
picture clipping�
Dot by Dot
"Dot by Dot" is a non-scaling display� Depending
on the input signal format, the picture is
displayed with side panels and/or bars at the top
and bottom (i.e. VGA input source).
Notes:
• Using the special functions to change the
size of the displayed image (e.g. changing the
height/width ratio) for the purpose of public
display or commercial gain may infringe on
copyright laws�
• If the aspect ratio of the selected format is
different from the one of the TV transmission
or video programme, it can cause a difference
in vision. Change to the correct aspect ratio
picture size.
• When using the PC connected via HDMI or
RGB/PC terminal, the moving image quality
may be deteriorated.
Using the picture still
• Press r to freeze the picture�
Even if an image is frozen on the TV screen, the
pictures are running on the input source� Audio
continues to be output as well�
To return to a moving picture, press r again�
(M ovin g)
Note:
If you use this function except for the purpose of
your private viewing and listening, it may infringe
the copyright protected by the copyright laws.
20
Using the TV's features

Adjusting the picture position

Adjustment to the position of the picture may be
made to suit your viewing preferences�
1
2
3
Notes:
• When the picture size is in Wide or 4:3 mode,
• When the picture size is in Native, PC Wide,
Resetting the picture position
This function resets your picture position settings
to the factory settings�
1
2
Activating the Picture Mode
This TV offers the choice of the personalized
picture style� Press
modes available�
AutoView, Dynamic, Standard, Movie, Store,
Game and PC are preset options and affect
many features/settings within the TV�
( St il l)
Notes:
• Because the AutoView mode automatically
• Store mode is only available when Location is
From the Display Settings in the
PREFERENCES menu, press s or r to
select Picture Position�
Display Settings
Auto Format
4:3 Stretch
Picture Position
Press , then press s or r to select the
item you want to adjust�
Picture Position
Horizontal Position
Vertical Position
Reset
Press v or w to adjust the settings as
desired�
Horizontal Position
only the Horizontal position can be adjusted.
PC Normal and Dot by Dot mode, none of this
function will be available.
From the Picture position menu, press s or
r to select Reset�
Press �
adjusts picture settings based on ambient light
conditions, the Auto Brightness Sensor and
Expert Mode menus are greyed out when it is
selected.
set to Store.
On
Off
0
0
0
to view the different