Cap Strength FM-CSH1006 Assembly Manual page 10

IIIustration 2
Mounting the base unit frame：
Step 1：Vertically place the main frame support (1) onto the base frame (7). Secure them with bolts (34), pulley
bracket-D (30), washers (51) and nuts (45)
Step 2：Connect the Guide Rod Support (6) to the top frame (2) by using bolts (35), washers (51), enforcements (25)
and nuts (45).
Step 3： Attach the entire piece making sure that it is aligned correctly to the guide rods (15) and the main frame support
(1), Then secure by using bolts (35, 36), washers (51), enforcement (25) and nuts (45).
Step 5：Attach the Pulley Housing (11) to the main frame support (1) with bolt (40) washers (51), and nut (45).
Step 6：Attach pulley brackets C (28) to either side of Pulley Housing (11) with bolts (39), washers (51), and nuts (45).
10