Operation Of The Filter - Frymaster Pro H55-Series Installation And Operation Manual

4. Replace the Magnasol filter assembly in the filter pan, ensuring that the fitting on the bottom of
the assembly is securely seated in the port in the bottom of the pan. Sprinkle one cup of the
Magnasol XL filter powder evenly over the screen.
5. Replace the crumb tray, then push the filter pan back into the fryer, positioning it all the way to
the back of the cabinet.
4.3

Operation of the Filter

Draining and filtering of cooking oil must be accomplished with care to avoid the
possibility of a serious burn caused by careless handling. The oil to be filtered is at
or near 350°F (177°C). Ensure drain handles are in their proper position before
operating any switches or valves.
draining and filtering cooking oil.
NEVER attempt to drain cooking oil from the fryer with the burners lit! Doing so will
cause irreparable damage to the frypot and may cause a flash fire. Doing so will also
void the Frymaster warranty.
1. Turn the fryer power OFF.
frypot into the filter pan by rotating the
valves counter clockwise to the right. If
necessary, use the Fryer's Friend clean-
out rod to clear the drain from inside the
frypot.
Do not drain more than one frypot at a time into the built-in filtration unit to avoid
overflow and spillage of hot oil.
NEVER attempt to clear a clogged drain valve from the front of the valve! Hot oil will
rush out creating the potential for severe burns.
DO NOT hammer on the drain valve with the cleanout rod or other objects. Damage
to the ball inside will result in leaks and will void the Frymaster warranty.
DANGER
Wear all appropriate safety equipment when
DANGER
Drain the
DANGER
DANGER
4-5
Open drain valves
by rotating to the
right.