Siemens OpenScape Voice Operating Manual page 90

Enhanced phone functions
Step by Step
User
Configuration
Outgoing calls
Busy when dialing
Yes
Save & exit
90
Allowing "Busy When Dialling"
If you activate this function, an incoming call received
while you are performing dialing is rejected. The caller
then hears the busy signal.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
This setup option can also be found under "Han-
dling" in the "Incoming calls" menu.