Setting Touchguide Sensitivity (V1 R4.X Or Higher) - Siemens OpenScape Voice Operating Manual

Step by Step
User
Phone
Display
TouchGuide setting
Save & exit
Setting TouchGuide sensitivity (V1 R4.x
or higher)
Adjust the sensitivity of the TouchGuide
choosing one of the four settings available.
z You can also configure this setting via the Web interface
page 187.
v
Press the key shown until the "Settings" tab is active.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Confirm the option shown.
W
Set the sensitivity (freely adjustable).
or
ac
You can choose one of four levels for the sensitivity.
i
Confirm the option shown.
Select and confirm the option shown.
Individual phone configuration
page 20 by
147