Siemens OpenScape Voice Operating Manual page 81

Step by Step
User
Configuration
Incoming calls
Handling
Allow call waiting
Yes
Save & exit
Allowing call waiting
z You can also configure this setting via the Web interface
page 187.
If the Call waiting (second call) function is deacti-
vated, a caller hears the busy signal if you are al-
ready conducting a call.
Prerequisite: The option was programmed by your ad-
ministrator.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
When Allow call waiting is activated,a configured key
can be used to switch between allowing and not allow-
ing a second call (
Enhanced phone functions
page 71).
81