Front Panel
1. Operation indicator lamp
2. Manual eject hole
Used to manually eject the tray in an event when it will not open normally.
3. Open/close button
4. Shutter or tray
Rear Panel
1. AUDIO output connector
For connecting the internal audio cable.
2. Jumper connector
For setting the PDC drive to Master/Slave/Cable Select.
3. IDE connector
For connecting the internal IDE cable.
4. Power supply connector
For connecting the power cable from the computer.
5. Digital AUDIO connector
For connecting a Digital Audio Cable (Sound card must support Digital Audio)
Parts and Functions
6