Speed-DAl Numbers; Speed-Dial Numbers; Adding Or Editing A Speed-Dial Number; Erasing A Speed-Dial Number - Oki F0305 User Manual

Speed-dial numbers

Adding or editing a speed-dial number

Your machine can store up to 160 speed-dial numbers, each designated by a three-digit
identifier codes (001 through 160.)
1
Press <Menu>, <1>, <2>, <1>, <Enter>. The empty speed-dial number will be shown.
Enter Speed-Dial No.
001:No Number Stored
2
Press < q > or <p> to select a speed-dial number.
You can also select a speed-dial number by directly entering that three-digit identifier
code (001-160).
3
Press <Enter>.
001:Fax Number
_
4
Use the numeric keys to enter the number as if performing a manual dial. The
number can hold up to 40 characters:
To change the number, press < t > or < u > to move the cursor and press <Cancel> to
erase the number. Then enter the correct number.
5
Press <Enter>.
001:Name
_
6
Use the numeric keys to enter the speed dial name.
The name can hold up to 24 characters.
(Regarding how to enter characters, see "Entering character," on page 2-2.)
To change the name, press < t > or < u > to move the cursor and press <Cancel> to
erase the name. Then enter the name correctly.
7
Press <Enter> to save the setting.
The next empty speed-dial number will be shown.
8
To enter another speed-dial number, repeat this procedure from step 2.
To exit the operation and return to the standby mode, press <Reset>.
NOTE
To print a list of speed-dial numbers, press <Menu>, <5>, <1>, <0>, <8>, <Enter>.

Erasing a speed-dial number

1
Press <Menu>, <1>, <2>, <2>, <Enter>.
2
Press < q > or <p> to select the speed-dial number.
You can also select the speed-dial number by directly entering that three-digit identi-
fier code.
3
Press <Enter> twice.
If you want to exit without erasing, press <Cancel>.
4
To erase another speed-dial number, repeat this procedure from step 2.
Otherwise, press <Reset> to return to the standby mode.
3-6 A
utodiAller
;Upper
& d
iAlling options