Oki OKIOFFICE84 Maintenance Manual page 21

Facsimile transceiver
Table of Contents

Advertisement

No.
Item
12
Copy stacking
13
Scanning resolution
14
Image scanning method
15
Contrast control
16
Recording resolution
17
Recording system
18
Skew of recording paper
19
Copy darkness
20
Copy uniformity
21
Recording paper running out
40672201TH Rev. 4
Table 1.5.1 (5/10) Basic Performance Specifications
The fax can discharge printed copies and stack them faceup.
Maximum sheets on the copy stacker: 30*
Note* : Oki Data recommended paper
Horizontal:
• 300 dot/inch
Vertical:
Transmission mode:
COPY mode:
NA Letter size (2592-bit) contact image sensor
1) Automatic background sensing
2) The LIGHT and DARK contrasts will automatically be
Horizontal:
Vertical:
Variable: Automatically adjusted to the paper length.
Electro-photographic printing
1) 211.3mm (2496 bit) or 216.7mm (2560 bit) LED print head
Maximum allowable skew is + or - 1 mm over an advance of
100 mm.
1) Black image:
2) White background: Not greater than 0.2 OD
Printed copies will exhibit a uniform density of the printed and
background area:
1) From edge to edge:
2) From copy to the next copy: 30%
The fax can detect the no-paper condition by a photosensor.
When the paper has run out in the local copy operation, the
scanning will stop with "PAPER OUT/JAM" on the LCD and an
ALARM LED turns on without an alarm tone.
When the paper has run out while a message is being received
and the no-paper reception is activated, the LCD display will
show "MSG. IN MEMORY", and the ALARM LED turns on.
Specifications
• 3.85 line/mm (STD), 7.7 line/mm (FINE) or 15.4 line/mm
(EX.FINE)
• 3.85 line/mm, 7.7 line/mm, 15.4 line/mm or 300 dot/
inch.
A continuous document background of 0.3 OD (optical
density) or less will be transmitted as white.
adjusted to improve image quality.
• 300 dot/inch
• Fixed: 3.85 line/mm (STD), 7.7 line/mm (FINE), 15.4
line/mm (EX-FINE) 300 dot/inch (EX-FINE)
• 300 to 412 dot/inch
• 3.85 to 5.06 line/mm (STD)
• 7.7 to 10.13 line/mm (FINE)
• 15.4 to 20.24 line/mm (EX. FINE)
Greater than 1.2 OD (Optical den-
sity)
(Optical density)
1 - 14
25%

Advertisement

Table of Contents
loading

This manual is also suitable for:

Okifax 4500

Table of Contents