Oki OKIOFFICE84 Maintenance Manual page 166

6.4 Printer Counter Display/Clear
1. Purpose
The service personnel can clear and check the following data:
• Image Drum
• Toner
• Image Drum (Total)
• Print
• Scan
2. Procedure
The following shows the case when the service bit has been set ON.
Operations:
To bring the LCD up to the desired message,
press SELECT FUNCTION key once and
one-touch key No. 7 in the standby mode.
(In case of no message in the memory)
←
Press key or
Note:
DRUM (T) will be used to know the total in-use life of the machine.
→
key.
ARE YOU SURE ?
YES (←)
← Key
CLEAR
6 - 7
The display shows:
SELECT FUNCTION (OT)
MEMORY AVAIL.= 100%
Press OT7
DRUM COUNT
CLEAR (←)
← Key
TONER COUNT
CLEAR (←)
← Key
DRUM(T)COUNT XXXXXX
CLEAR (←)
← Key
PRINT COUNT
CLEAR (←)
← Key
SCAN COUNT
CLEAR (←)
← Key
NO(→)
→ Key
After more than 3 sec.
XXXXXX
NEXT(→)
→ Key
XXXXXX
NEXT(→)
→ Key
NEXT(→)
→ Key
XXXXXX
NEXT(→)
→ Key
XXXXXX
NEXT(→)
→ Key
40672201TH Rev. 4